Air Handler Unit

All You Need to Know about Air Handler Unit Before Buying

Air Handler Unit

Do you wish to upgrade your HVAC system? Then you will probably need to know about the air handler unit. Depending on the season, it circulates and conditions both hot and cool air. To get the most out of your HVAC system, an air handler works in combination with your air conditioner or heat pump. As replacing a home HVAC system is such a massive investment, picking the proper brand solutions is important. That is why you should be aware of all vital details to make a wise decision and save money. In this article, we will explain how air handlers operate, which ones are ideal for your system, and how much does the air handler cost.

What Is An Air Handler?

As they appear similar and are both placed inside the house, you may confuse an air handler with a furnace. The air handler unit is the indoor element of your two-part system that collaborates with the heating and cooling equipment to provide a consistent environment throughout your
house. It contains an evaporator coil, a blower, and various ventilation system components like filter racks or chambers, sound attenuators, and dampers. It is a part of your HVAC system that works with your split-system heat pump or air conditioner on the inside.

How Does it Work?

The air handler unit has to exchange heat and spread it throughout the house. It is typically used in conjunction with your existing HVAC system. Installation is usually done in well ventilated sections of your home, or in places where there is no condensation or humidity. The external heat pump collects heat from the air outside to heat your house via its refrigerant.
On the other hand, air flows into the air handler from the return duct to chill your house. It blows over the evaporator coil within the air handler, which absorbs heat and eliminates humidity with the help of the refrigerant contained inside it. One thing you need to keep in mind, if the indoor air handler and outdoor heat pump are not properly matched, the system will not provide the expected efficiency levels, resulting in higher
energy costs.

What are Upflow and Downflow Air Handler?

Upflow Air Handler


An upflow air handler is designe for upright installation and circulates air via the side or bottom before exhausting it through the top. It is commonly found in the basement, closet, and attic installations. It draws cold air from the bottom of the unit and discharges warm air upwards. Because heat flows from the floor of a room upwards, up-flow air handlers tend to heat areas more efficiently.

Downflow Air Handler


Downflow refers to the airflow of a certain air handler. Heat is sent downwards by the downflow air handler to the place that demands it. As a result, it is naturally suit to installation in attics. If you don’t have an attic, they might be put on the top levels of your home.

How Much Does An Air Handler Cost?

To supply cooled or heated air for an indoor space, air handlers link to an air conditioner or heat pump. They are available in a range of sizes and typically last 10 to 15 years. To treat the air, they may employ refrigerant, chilled water, or hot water. A fan coil unit is a non-ductwork form
of the handler. An air handler costs between $500 and $3,500, with most households spending between $700 and $1,500. However, it may vary in size, brand, and quality.

Well-known Brands For Best Air Handlers

Goodman


While Goodman is nearly 50 years old, it is one of the market’s youngest HVAC brands. Their systems are well-known for their sturdy construction and durability improvements. They feature coil guards to protect the unit from lawn mower dust and other possible dangers, as well as specific filters to keep dirt out of the system. That excellent construction extends to its furnaces, which feature a robust steel heat exchanger and a multi-speed blower that increases efficiency while keeping the unit quiet.


Trane


Trane has a reputation for producing some of the most dependable and efficient HVAC systems during its more than 135-year history. It is also among the most premium brands. It is also one of the few HVAC companies that do not offer its products in product lines. The company routinely
receives some of the industry’s best reliability scores. Trane air handlers are well-known for their performance and longevity.


Carrier


Carrier is a market leader not just in air conditioners, but also in heat pumps and gas furnaces. Their top-tier products are among the most costly on the market, but the brand is also well- known at the lower-end due to its economical Comfort and efficient series. Comparing Air Handler Prices Between Goodman

Oxbox a Trane Brand 1.5 Ton Single-Stage Multi 1/8 hp Air Handler


It is a 1.5-ton air handler with an all-aluminum coil. Oxbox air handlers can accommodate 13, 14, and 16 SEER versions. Trane air handler provides a variety of airflow designs for conversion: Vertical up-flow/downflow; left or right horizontal flow. Their auxiliary heaters range in power from 5kW to 20kW. It also features a detachable front panel, as well as blower and coil components that pull out for easy maintenance and troubleshooting.
Price: $554.62 at BudgetAC

Goodman 18000 BTU 1.5 Ton Vertical Wall Mount Air Handler with Electric Heat – 5 kW


The air handler weighs 1.5 tons. A Check Flow rater is included for cooling-only and heat pump operation. Direct-drive, multi-speed motors enable variable air volume for heating/cooling. It has rust-resistant nickel-chromium heating components that are sequence-controlled and range in
power from 3 to 10 kW.
Price: $540.87 at BudgetAC

Goodman air handler

Oxbox a Trane Brand 2 Ton Upflow and Horizontal Air Handler


It’s a 2 ton air handler with a coil made entirely of aluminum. It has been certified to meet the Energy Star cabinet air leakage requirement of less than 2%. Auxiliary heaters range in power from 5 to 20 kW.
Price: $560.03 at BudgetAC

Goodman 30000 BTU 2.5 Ton Vertical Wall Mount Air Handler with Electric Heat – 5 kW


It has 3, 5, 8, and 10 kW rust-resistant nickel-chromium heating components that are sequence- controlled. It has a 30000 BTU heat rating.
Price: $660.66 at BudgetAC

3 Ton Air Handler Multi 1/2 hp Trane Brand


The Oxbox 3 Ton air handler can adapt to 13, 14, and 16 SEER situations, and dual drainage spouts provide input versatility. It has a heat rating of 36000 BTU.
Price: $877.31 at BudgetAC

Goodman 3 Ton Multi-Position Air Handler with Smart Frame Cabinet and TXV Valve


For cooling and heat pump applications, it features internal factory-fitted thermal expansion valves. It has a 36000 BTU heat rating. It also comes with a coil mounting track for easy relocation.
Price: $960.74 at BudgetAC

4 Ton Air Handler Trane Brand Upflow and Horizontal


It is a top-of-the-line 4 Ton Air Handler Trane Upflow and Horizontal. It’s a complete replacement that’s 208/230V and weighs 159 pounds. It also includes dual drainage spouts for more installation versatility.
Price: $912.53 at BudgetAC

Goodman 4 Ton Multi-Position Air Handler with Smart Frame Cabinet


It’s a 4-ton, multi-speed, multi-position air handler. It has a 48000 BTU cooling rating. It has a PSC blower motor that is direct drive and multi-speed.
Price: $899.03 at BudgetAC

5 Ton Air Handler Oxbox a Trane Brand

Oxbox 5 Ton air handler is available in 13 SEER, 14 SEER, and 16 SEER versions, with auxiliary heaters ranging from 5kW to 20kW.
Price: $1101.72 at BudgetAC

Goodman 5 Ton Multi-Position Air Handler with Smart Frame Cabinet


It is a 5-ton multi-position air handler with a 60000 BTU cooling rating. It has an all-aluminum evaporator coil.
Price: $1162.81 at BudgetAC

How to Clean Air Handler Coils?


Maintenance is essential for keeping your HVAC system in good operating order. Split-system cooling systems, like central air conditioners, have indoor and outdoor units. The condenser, compressor, and condenser coils are place in the outdoor unit, while the air handling system, evaporator, and evaporator coils are place in the indoor unit. You can also clean the air handler coils if you are well-known in mechanics.

Here are some helpful cleaning options:
 Check for debris and dirt in the coils. If you find any, clean them properly.
 Remove the access panel so that you can find the coils and clean them.
 You can use a brush to clean if you find less dirt. But don’t use wire brushes.
 Mild detergent and water is another option to clean them.
 If the dirt is ruining your air conditioner’s performance, call a professional cleaner who
will help you clean them effectively.

Are You Ready to Buy?


We tried to clear up any misconceptions concerning the air handler unit in this article. Now, it’s up to you to decide which brand you want or which ton air handler would be ideal for your HVAC system. If you are not sure which one is best for you, don’t hesitate to consult a professional. Remember that a high-quality air handler will help your air conditioner perform optimally. So, don’t feel embarrassed to be picky.

Leave a Reply

Your email address will not be published. Required fields are marked *